
24 Hour Call Out Electricians
Guildford Fuse Board Repairs & Replacement
Every circuit in the building relies on your fuse board for protection. If it fails, buzzes, won't reset or has simply had its day, we repair or replace it so your home is protected once more.
- Urgent fuse board repairs
- Consumer unit replacements and upgrades
- Tested and certified once finished
- Pricing agreed before work begins
Our services
Fuse board jobs we handle
Whether it's one failed breaker or a complete replacement, we'll give you an honest view of which you need.
Faulty breakers and RCDs
Breakers and RCDs that won't reset, trip without reason or have stopped working are tested, then replaced.
Heat and burn damage
Scorched, melted or burnt connections inside the board are made safe, then repaired or replaced.
Buzzing and crackling
A noisy fuse board usually points to a loose or failing connection. We track it down and put it right.
Consumer unit upgrades
Old fuse boxes with rewireable fuses swapped for a modern consumer unit that includes RCD protection.
Relocating or adding circuits
New circuits for extensions, kitchens or outbuildings connected to the board safely.
Following a failed EICR
Where your report singles out the fuse board, we can do the replacement and re-test.
The issue in detail
Understanding fuse boards
The fuse board, also called a consumer unit, is the control centre of your electrical installation. Here's what it does, how it goes wrong and how we deal with it.
What a fuse board does
Incoming power arrives at the fuse board, which splits it into separate circuits that each have their own protection. Circuit breakers (MCBs) cut off when a circuit is overloaded or shorts. RCDs cut off when current leaks to earth, which guards people against electric shock. Some boards use RCBOs, combining both functions in a single device for every circuit.
Older boards can have rewireable fuses, no RCD protection whatsoever, or a plastic enclosure mounted on a wooden backboard. In homes today, modern boards come in a non-combustible enclosure, usually metal, with RCD protection on most or all circuits.
The usual culprits
- Loose busbar and terminal connectionsConnections inside the board that haven't been tightened enough get hot, leading to scorching and burning smells.
- Worn devicesBreakers and RCDs that have tripped many times can stop resetting or trip without cause.
- Nuisance RCD trippingA single RCD serving many circuits can trip when several small leakages add together.
- Water ingressLeaks above or close to the board can lead to tracking, corrosion and dangerous faults.
- Overloaded boardsAdditional circuits and heavier loads piled onto an old board that was never built to take them.
- Ageing, outdated boardsBoards with rewireable fuses or no RCD protection don't meet modern safety standards.
How we put it right
First we test the board and every circuit, to establish whether one device has failed or the whole board needs replacing. A failed breaker or RCD can often be swapped there and then. Burnt connections are cut back, remade and tightened to the correct torque.
Where the board is old, damaged or unsafe, we'll recommend replacing it. Every circuit is tested before the new board goes in, since a fault the old board was masking will show up immediately on a modern RCD-protected one. After fitting, each circuit is tested again and you receive the certificate for the work.
Time for a change?
Warning signs your fuse board needs a look
If any of these ring a bell, it's worth having your fuse board checked.
Old fuses or a wooden backboard
Rewireable fuses, a wooden backboard or a patchwork of old fuse boxes all suggest the board is well past its best.
No RCD protection
Many older boards have no RCD, the device that cuts the power if someone receives a shock.
Frequent trips or a switch that won't reset
A board that trips regularly, or a switch that won't stay up, should be tested.
Heat, buzzing or a burning smell
If it's safe to do so, switch off and ring us straight away on 01483 000000.
Facing an electrical emergency now?
We reach you within 30 to 90 minutes, day or night.
Consumer units
Fuse box, fuse board or consumer unit
Fuse box, fuse board, consumer unit, distribution board, RCD board: each is just another name for the box where your electricity supply is divided into protected circuits. Whichever term you use, we repair, replace and upgrade them in Guildford and the surrounding villages.
Replacing the fuse board or upgrading to a new consumer unit is the best route to bringing an old installation up to modern safety standards, with RCD protection included. We also take on emergency fuse box repairs at any hour, covering failed RCDs, breakers that won't reset and boards with burn damage.
Need a fuse box upgrade, a new consumer unit, a fuse board change, or an emergency electrician because your fuse box has failed? Call our Guildford electricians.
Common queries
Commonly asked questions
How long will a fuse board replacement take?
For most homes it takes roughly a day. The power is off while we work, and we'll tell you when to expect it back on.
Does my fuse board need replacing, or will a repair do?
Quite often just one breaker or RCD has failed, and that can be replaced. If the board is old, damaged or unsafe, we'll explain why replacing it is the better choice.
Will I receive a certificate?
Yes. We test a new consumer unit once it's fitted, and you receive the certificate for the work.
Can you attend if my fuse board fails during the night?
Yes. Emergency calls are taken 24 hours a day, and we'll make your fuse board safe and restore power wherever we can.
More help




